Rugged Ridge Rock Crawler Rear Bumper, 2-Inch Hitch, 87-06 Jeep Wrangler - Manual

Rock Crawler Classic Rear Bumper : P/N 11503.20 (Black)
For 87-06 Jeep® YJ & TJ Wrangler
Important notice:
Carefully read instructions before attempting to install this product. Rugged Ridge is in no way responsible
for any damage to the vehicle or personal injury that may occur during the installation or use of this
product.
NO DRILLING REQUIRED.
Supplied components:
Rear bumper p/n: 11503.20 (1) 3/8” x 1 ¼” Hex head bolts (8)
Backing plates (4) 3/8” Flat Washers (8)
3/8” Locking Washer (8) 7/16” x 1 ¼” Hex head bolt (2)
7/16” Flat Washer (2) 7/16” Lock Washer (2)
Installation Instructions:
(Step 1): Remove factory rear bumper if equipped. For some TJ applications the rear body mount bolt and
bushing may be removed to ease installation. (Fig.1 and Fig.2)
Fig. 1 Fig.2
(Step 2): Locate (2) backing plates, (4) 3/8” Hex head bolts, (4) 3/8” Flat washers, and (4) 3/8” Lock
washers. With the help of another person attach backing plates to the rear vehicle frame.
Align holes in the rear plate on the Classic Rock Crawler bumper to those existing in the frame.