Rugged Ridge Hood Guard, Body Armor, 97-06 Jeep Wrangler User Manual
Rugged Ridge For the car
11650.17 (Hood Stone Guard)
Installation Instructions
Step. 1
Clean mounting surface with a strong cleaner or rubbing alcohol. Avoid areas that the product will not be
adhered to.
THIS MUST BE DONE FOR ADHESIVE TAPE TO PROPERLY STICK. FAILURE TO CLEAN
COULD RESULT IN POOR ATTACHMENT AND FAILURE OF PRODUCT TO STAY
ATTACHED.
Allow area to dry completely before attaching body armor.
TOOLS NEEDED
: (1) Drill , (1) 7/64” drill bit, and (1) Phillips Head screw driver.
Part number 11650.17 (Hood Stone Guard)
Step.2
Test fit the Hood Guard to the vehicle before removing the plastic backing film. This will aid in aligning
the piece properly before securing with the two sided 3M tape.
Step.3
Remove plastic backing film from the affixed two sided 3M tape. The plastic film can be remove easier
with the aid of a knife or cutting blade. Peel from leading edges and pull away from tape.
Step. 4
Position Hood Armor close to the hood and attach from the center of hood outward to the edges. Make
sure that it is evenly spaced before applying
any pressure to armor
.
When satisfied
with placement
apply pressure to all areas to properly secure armor to vehicle.
Pg.1
Step.5
- HD Steering Box Mount, 76-86 Jeep CJ Models (4 pages)
- Manual Locking Hub Set, 86.5-93 Nissan Frontier, Pathfinder, & Xterras (1 page)
- Manual Locking Hub Conversion Kit, 90-97 Ford, Mazda SUV & Pickup (2 pages)
- AMC20 Heavy Duty Differential Cover (1 page)
- Dana 44 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 30 (1 page)
- Differential Skid Plate, Dana 44 (1 page)
- Heavy Duty Steering Box Brace, 84-01 Jeep Cherokee (XJ) (3 pages)
- Differential Skid Plate, Jeep logo, Dana 44 (1 page)
- Dana 30 Heavy Duty Differential Cover (1 page)
- Dana 35 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 35 (1 page)
- Manual Locking Hub Set, 86-93 Nissan Pathfinder & Pickup (1 page)
- Manual Locking Hub Set, 90-94 Nissan Patrol (1 page)
- Heavy Duty Steering Box Brace, 76-86 Jeep CJ Models (3 pages)
- Differential Skid Plate, Jeep logo, Dana 30 (1 page)
- Dana 60 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Jeep logo, Dana 35 (1 page)
- Tail Light Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- Headlight Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- Euro Style Turn Signal & Side Marker Guard,07-14 Jeep Wrangler (JK) (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler (JK) (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- 3-Inch Round Tube Steps, Black, 07-14 Jeep Wrangler Unlimited (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Wrangler Unlimited (JK) (2 pages)
- Steering Component Skid Plate, 07-14 Jeep Wrangler (JK) (2 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Rocker Side Panels, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Front Fender Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 4-Door Wrangler (JK) (2 pages)
- Hood Guard, Body Armor, 07-14 Jeep Wrangler (1 page)
- Tail Light Euro Guards, 07-14 Jeep Wrangler (JK) (3 pages)
- Euro Guard, Turn Signal, Black, 07-14 Jeep Wrangler (1 page)
- RRC Side Armor Guards, 87-06 Jeep Wrangler (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler (JK) (1 page)
- 3-Inch Round Side Steps, Black, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Jeep Wrangler (JK) (2 pages)
- 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) (10 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- Side Marker Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- Fog Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- 3-Inch Round Tube Side Steps, Black, 97-06 Jeep Wrangler (TJ) (2 pages)
- Gas Tank Skid Plate, 97-06 Jeep Wrangler (TJ) (3 pages)