AMT Datasouth 400 - Manual (Page 34)

User's Guide 34
Smooth Scalable Fonts
PAL TM Print and Program capable printers allow a font to be selected by name, scaled, rotated,
and placed on the drawing service. The table below lists the unique names used to select the
fonts and a print sample showing a specific point size. Please refer to the PAL
TM Print and
Program Reference manual for detailed information on the use of fonts.
Font
Point
Size
PAL TM
Identifier Sample
Sans Serif 14 SansSerif
OCRB 10 OCRB
Table 1 – PAL TM Font List and Samples
Supported Bar Codes
PAL TM Print and Program capable printers allow a bar code to be selected by name, rotated
if needed, and placed on the drawing surface. All popular linear and 2D bar codes are
supported. Depending on bar code type, a number of parameters may be adjusted, as
needed for example human readable, height, X dimension, check digits. Please refer to the
PAL
TM Print and Program Reference manual for detail information on the use of bar codes.
Bar Code PAL TM
Identifier
Sample
Code 39 /Code39
Code 93 /Code93
Code 128
A, B and C
/Code128
Interleave
2 of 5
/I2of5