Acer Altos R700 Series - Manual (Page 107)

97
Server Board Jumpers
Label Jumper Name What it does at system reset
A RJ-45 Serial Port
Config Configures either a DSR or a DCD signal to
the connector. See “RJ-45 Serial Port” on
page 15.
B CMOS CLR If these pins are jumpered, the CMOS
settings are cleared. These pins should not
be jumpered for normal operation.
C PSWD CLR If these pins are jumpered, the password is
cleared. These pins should not be
jumpered for normal operation.
BS811.f/cppl!!Qbhf!:8!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN