Glastender BLC-3/4-2 - Manual (Page 6)

5
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
8. e
LeCtRoniC
t
empeRatuRe
C
ontRoL
p
RoGRamminG
BLC-1/3, BLC-1/3-2, BLC-1/2, BLC-1/2-2, BLC-3/4, BLC-3/4-2 (note: t
his ContRoL
useD on units pRioR to
11/21/2013 sn134147623x):
The unit is shipped from the factory set at 26°F, differential set at 5, in C1, cooling mode. If reprogramming or adjust-
ing is necessary follow these steps:
Step 1 Press the SET key to start programming.
Use the up or down arrow to toggle between and select F for degrees Fahrenheit or C for degrees Celsius.
Step 2 Press the SET key again to access the setpoint.
To achieve the desired temperature, press the UP key to increase or the DOWN key to decrease the setpoint.
Step 3 Press the SET key again to access the differential.
To achieve the desired differential, press the UP key to increase or the DOWN key to decrease the setting.
Step 4 Press the SET key again to access the mode.
Use the up or down arrow to toggle between and select C1, cooling or H1, heating mode.
Step 5 Press the SET key again to complete programming.
C
oLD
C
ontRoL
a
Djustment
, BLC-1/3-e
The unit is shipped from the factory set at 26°F, differential set at 5. To decrease the temperature turn the adjusting knob
clockwise. To increase the temperature turn the adjusting knob counter clockwise.
t
empeRatuRe
C
ontRoL
Scale
Adjusting Knob