beautypg.com

Glastender BLC-3/4-2 User Manual

Page 13

background image

12

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com

R

emote

C

ontRoL

p

aneL

i

nstaLLation

p

hoto

R

emote

B

eeR

L

ine

C

hiLLeR

a

CCessoRies

The Glastender exclusive, patent pending beer line

chiller design houses the heat exchanger inside the

condensing unit compartment. This unique feature

allows the control panel with glycol bath and recir-

culating pump(s) to be easily installed separately

from the condensing unit in a more conveniently

accessible location. Simply remove the control

panel from the condensing unit cabinet and mount

it in the desired location. Only glycol and electri-

cal lines need to be run between the control panel

and the condensing unit cabinet.

Glycol return from

beer tower to heat

exchanger

Glycol line from

pump to beer tower

Glycol line from bath

to pump

Recirculating pump

1 gallon glycol bath

Condensing unit &

heat exchanger cabinet

Glycol line from heat exchanger to bath

Electrical connection between condensing

unit & control panel by local electrician

Digital temperature control with LCD display

Power cord for unit

Photo shows BLC-1/3 in an installation setting with the control panel installed remotely from the condensing unit cabinet.

All Glastender line chillers may be placed on 6" legs that are adjust-

able up to 7". The leg set includes 16 gauge galvanized steel that are

mounted to the base plate of the unit.

A line chiller stand is 26-1/2" wide by 39" high by 24" deep and comes

with adjustable feet for leveling. The bottom shelf is at the 8" high

level. The top shelf has holes that correspond to the line chiller mount-

ing holes, so the line chiller can be bolted to the shelf. One size stand

is used for all line chiller models.

A line chiller wall rack is a shelf that is mounted to a structural wall.

The shelf has holes that correspond to the line chiller mounting holes,

so the line chiller can be bolted to the shelf. One size rack is used for

all line chiller models.

W

all

R

acks

s

tands

This manual is related to the following products: