Goulds Pumps 3355 - IOM - Manual (Page 11)

Transportation and Storage
Lifting the pump
Hoist a bare pump using suitable slings under the bearing housing saddle on each end.
Figure 1: Example of the proper lifting method for a bare pump
Figure 2: Example of the proper lifting method for a bare pump
Baseplate-mounted units have lifting points for use with proper lifting devices.
Figure 3: Example of the proper lifting method for baseplate-mounted units with a driver
Storage guidelines
Storage location
The product must be stored in a covered and dry location free from heat, dirt, and vibrations.
NOTICE:
• Protect the product against humidity, heat sources, and mechanical damage.
• Do not place heavy weights on the packed product.
Pump storage requirements
Storage requirements depend on the amount of time that you store the unit. The normal
packaging is designed only to protect the unit during shipping.
Length of time in storage Storage requirements
Upon receipt/short-term (less than six months)
• Store in a covered and dry location.
Long-term (more than six months)
• Store in a covered and dry location.
• Store the unit free from heat, dirt, and vibra-
tions.
• Rotate the shaft by hand several times at least
every three months.
You can purchase long-term storage treatment with the initial unit order or you can purchase it
and apply it after the units are already in the field. Contact your local ITT sales representative.
Model 3355 Installation, Operation, and Maintenance Manual 9