Are of your – Minka Group F702-VB User Manual

Page 14

ARE OF YOUR

12.

Here are some suggestions to help you

maintain your fan.

1. Because of the fan's natural

movement, some connections may

become loose. Check the support

connections, brackets, and blade

attachments twice a year. Make sure

they are secure. (It is not necessary to

remove fan from ceiling.).

2. Clean your fan periodically to help

maintain its new appearance over the

years. Do not use water when cleaning.

This could damage the motor, or the

wood, or possibly cause an electrical

shock.

3. Use only a soft brush or lint-free

cloth to avoid scratching the finish. The

plating is sealed with a lacquer to

minimize discoloration or tarnishing.

4. You can apply a light oat of furniture

polish to the wood for additional

protection and enhanced beauty. Cover

small scratches with a light application

of shoe polish.
5. There is no need to oil your fan. The

motor has permanently lubricated

bearings.
6. All glass should be cleaned using

lukewarm soapy water and a soft cloth

or sponge.
DO NOT IMMERSE GLASS IN

HOT WATER. DO NOT PUT

GLASS INTO AN AUTOMATIC

DISHWASHER

WARNING

Make sure the power is off at the

electrical panel box Before you

attempt any repairs. Refer to the

section, "Making Electrical

Connections".

For any additional information about your Minka-Aire

Ceiling fan, please

write to:

1151 W. Bradford Court

Corona, CA 92882

For customer assistance call: 1-800-307-3267