Myron L PS6FCE - Manual (Page 34)

30 31
B. Hardware Setup
For a computer without Bluetooth
capability: If you don’t have the
dongle that came with the
BLUDOCK, one can be ordered
separately from the Myron L
Company. Order Model # BDDO.
Plug in your dongle and install per
manufacturer’s instructions.
For computers with
Bluetooth capability/
Bluetooth dongle installed:
First time use of the bluDock:
1. Press any parameter button
to turn the P
ool
P
ro
on.
2. Put the P
ool
P
ro
in “PC
On” mode by pressing the
key until “PC OFF”
appears (see Figure 26).
3. Then press the key.
“PC On” will be displayed
(see Figure 27).
NOTE: “PC Ini” may momentarily be
displayed while initializing (see Figure
28).
4. Add bluDock to your
Bluetooth devices per your
operating system procedure.
THE BLUDOCK DEVICE
PASSKEy IS 1234.
5. After pairing, note the number
of the COM port assigned
by the computer.
In Windows XP, note the number of the
outgoing COM port assigned by the computer.
NOTE: The unit will automatically power down after 60 sec. If the unit
powers down during pairing, repeat steps 1-3 above and continue.
C. Memory Stack Download
1. With the P
ool
P
ro
in “PC On” mode, open the U2CI
software application.
2. Verify that the port selected matches the COM port number noted
(first time only). This is the outgoing COM port on Windows XP.
3. In the U2CI application, click on the data download button. A
Figure 26
Figure 27
Figure 28