Myron L PS6FCE User Manual

Page 19

D. Procedure to Select a Solution

NOTE: Check display to see if solution displayed (KCl, NaCl, 442) is

already the type desired. If not:

Press

MIN

SALT

to select the parameter on

which you wish to change the

solution type.

Press and hold

key

for 3 seconds to make

“SEL” appear (see Figure 3).

(For demonstration purposes,

all 3 solution types are shown simultaneously.)

Use the

key to select type of solution desired

(ref. Solution Characteristics, pg. 40). The selected solution

type will be displayed: KCl, NaCl, or 442.

Press

to accept new solution type.

In these first six sections, you have learned

all you need to take accurate measurements.

The following sections contain calibration,

advanced operations and technical information.

F igure 3

K C l

442

NaC l