Varad Scanners® Tri-Color - Scanners® Styles: SPIDER-VS260, EVO-VS360, AERO-VS460, RAPTOR-VS560 - Manual

Features:
• 40 Selectable patterns
• Tri - Color SMT LED - Red/Blue/Purple
• Network multiple SCANNERS
• Three speed selections.
• Low power enable/disable mode.
• Temporary shut down.
• Temporary low power mode.
SCANNERS is a registered trademark of Varad USA
Thank you for purchasing our new generation
of SCANNERS . With our latest LED
technology, microcontroller and software
design we have added many new features
to provide you with the best visual theft
deterrence ever. This generation of
SCANNERS have 40 new and exciting
patterns along with three color LEDs,
adjustable speeds and programmable
features. You can select from a variety of
color changing, glowing and strobe patterns.
Each pattern is unique and will provide extra
excitement for visual theft deterrence!.
Mounting the SCANNERS :
Find suitable location for installation. Drill any holes if
necessary and clean surface with rubbing alcohol to
remove oils. Use the provided 3M™ double sided tape
and mount. Refer to following diagram for wiring
instructions.
Installation with alarm system:
SCANNERS will activate when alarm system is activated.
Battery negative or chassis ground
Battery positive (constant)
Alarm system accessory output or ground
output when armed.
Network for multiple SCANNERS . See
“Networking” for details
SCANNERS
Black
Red
Orange
White
How to select Patterns:
Ignition must be “ON”, press program button (Paper clip
for VS560C) momentarily and SCANNERS will display
next pattern. Repeat to view next pattern. The SCANNERS
has a total of 40 patterns. Note! - After 30 seconds you
cannot change patterns. To change patterns after 30
seconds cycle the ignition.
How to change speed:
Ignition must be “ON”, push program button rapidly two
times. SCANNERS will display the next speed. Repeat
to select next speed. The SCANNERS has three speed
selections.
How to operate SCANNERS : Installation without alarm system:
SCANNERS will activate when engine is turned off.
SCANNERS
Black
Red
Orange
White
Battery negative or chassis ground
Battery positive (constant)
Network for multiple SCANNERS
installation. See “Networking” for details
Ignition - Ground when engine is “OFF”.
(See fuse box)
Networking multiple SCANNERS :
This type of installation requires multiple SCANNERS .
Be sure to connect all wires together at the same location.
This will ensure proper network communication.
Black
Red
Orange
Connect all white
wires together. White -
Tri-Color Series
Program button
Program button on Raptor
(Use a small paper clip)
IM-VSX60V2
®
®
®
®
®
®
®
SCANNERS
SCANNERS
SCANNERS
®
®
®
®
®
®
®
®
®
®
®
®
®
® OFF
Ignition
ON
Ignition
®