Varad LL - Flashing Alarm LED User Manual
Flashing alarm led, Led mounting / installation
LED
Constant 12V
Black
Yellow
Red
IGNITION • Ground when engine is OFF
Ground
LED
Constant 12V
Black
Yellow
Red
Join the Yellow
and Black wire
together
FlaShing Alarm LED
Designed for installation in all automobiles equipped with or without an alarm system.
Product Specifications:
Avg. Current - 20ma
1. Select the desired installation
location and drill a 5/16" hole.
3. Insert the LED from behind
the hole and reassemble the
bezel.
2. Separate the bezel . . .
(Pull to snap apart)
LED mounting / installation:
WWW.VARAD.COM
Installation 1: without alarm system
Installation 2: with alarm system
ALARM • Accessory output / ground when armed