NaceCare Solutions ST60BT - Manual (Page 15)

15
MAINTENANCE PROCEDURES
ATTENTION : Before any adjustment and/or maintenance procedure always
switch off the machine.
ATTENTION: disconnect the battery before starting any cleaning or
maintenance procedure on the machine.
CLEANING THE FILTER
ATTENTION: use gloves for protection when performing the steps listed below.
Once a week clean thoroughly the filter as follow :
Figure 25
1. Switch off the machine.
2. Remove the debris hopper.
3. Disconnect the connector of the filter shaker “a”
4. Slightly loosen (not completely) the lower knobs “b”
5. Rotate by 180° the upper locking levers “c”, take out the filter support frame using the
same levers .
Figure 26
1. Carefully clean the filter using a vacuum cleaner or (if a vacuum is not available)
gently shake the filter manually.
2. Reassemble all parts following the above operations in reverse.
b
a
b
c
c