ATI Technologies RADEON X800 - Manual (Page 47)

Using TV Out 41
You can reduce edge distortion by increasing the TV display’s horizontal
size or contrast.
Increasing the horizontal size of a TV display
1 Access the Display Properties dialog by right-clicking on the desktop
or navigating through Windows®
Control Panel .
2 Click on the Settings tab and then the Advanced button.
3 Click on the ATI Displays tab.
4 Click on the TV button.
5 Click the Adjustments tab.
6 In the Screen Size section, click on the plus (+) button beside the
horizontal arrowheads to increase the horizontal size of the TV
display.
7 Click OK or Apply to save the changes you have made.
You can also reduce edge distortion by increasing the TV’s contrast.
Increasing the contrast of a TV display
1 Access the Display Properties dialog by right-clicking on the desktop
or navigating through Windows®
Control Panel .
2 Click on the Settings tab and then the Advanced button.
3 Click on the ATI Displays tab.
4 Click on the TV button.
5 Drag the Contrast slider to the right to increase the contrast.
6 Click OK or Apply to save the changes you have made.
Using TV Display Alone
If you plan to move your computer to a place where you are using TV
display only, make sure that you have the TV display feature enabled prior
to removing the monitor.
The maximum display resolution for TV is 1024x768. Choosing a
resolution higher than this will cause the TV display to disappear if it is the
only display device.