Dow THERMAX™ Wall System - Manual (Page 3)

OPTION 6
1. Apply a compatible
construction-grade sealant to
inside of both J-Channel
flanges, following sealant
manufacturer instructions.
2. Fit closure around THERMAX™
board edge. (Figure 6)
Note: With each system, it is important to also
seal the wall-to-ceiling junction. For complete
installation instructions, visit the literature library
at www.DowMetalBuilding.com or call your
Dow representative.
NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for
determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other
government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries
or regions. Dow assumes no obligation or liability for the information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless otherwise expressly noted.
NO EXPRESS WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY DOW. ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Dow Polyisocyanurate Insulation
CAUTION: This product is combustible and shall only be used as specified by the local building code with respect to flame spread classification and to the use of a suitable thermal barrier. For more information, consult
MSDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400.
Dow Polyurethane Foam Insulation and Sealants
CAUTION: When cured, these products are combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240ºF (116ºC). For more information, consult
MSDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400 in the U.S. or 1-519-339-3711 in Canada.
GREAT STUFF PRO™ sealant and adhesive products contain isocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear
long sleeves, gloves, and safety glasses or goggles. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.
WARNING: Rigid foam does not constitute a working walkable surface or qualify as a fall protection product.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not develop in
any specific system.
Printed in U.S.A. ®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow Form No. 179-04458X-0212MCK
P R O D U C T / I N S T A L L A T I O N I N F O R M A T I O N . C O M M E R C I A L . P R O T E C T I O N M A N A G E M E N T
www.DowMetalBuilding.com Technical Information
1-866-583-BLUE (2583)
Sales Information
1-800-232-2436
IN THE U.S.
THE DOW CHEMICAL COMPANY
200 Larkin
Midland, MI 48674
Figure 6
McKAY211835
View from ground level – looking up wall
Side View