DiGiCo Optocore V221 - Manual (Page 15)

DiGiCo Optocore V221
A1-15
A3.2.4 Single Loop Console on Loop 2 ........................................
SD8, SD9, SD10 and SD11 consoles are only able to have connections fitted one loop and the internal connections within the
console will be to loop 1.
In the Options>Console menu, the Enable Optocore option allows the console to either be a loop 1 console or loop 2 console
(shown below) without having to alter the internal connections.
Single loop consoles operate independently on each loop. For example, a system can exist of a dual loop SD7 (IDs 1+2), an SD8
(ID3) on loop 1 and an SD10 (also ID3) on loop 2.
SD5s & SD7s that only have a single loop fitted can also set to operate on either Loop 1 or Loop 2.