Decolav 1466 - Manual (Page 3)

MODEL NUMBER: 1466 SERIES
Customer Service: 561-274-2110
www.decolav.com
LET YOUR DREAMS COME ALIVE, YOUR PASSIONS
BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS
®
3
•061008•
Item Description Qty
A Ceramic Vessel 1
PARTS
INSTALLATION INSTRUCTIONS
• STEP #1
• Affix template provided for countertop at desired
location with cellophane tape.
• Mark guidelines on countertop in several places.
• Drill a clearance hole approximately ¼" to ½"
(0.635 Cm – 1.27 Cm) inside the perimeter line
of template.
• Cut opening following the perimeter line of template.
• NOTE: Cutout Template Included
Clearance Hole Cut Opening
• STEP #2
• Check for cutout alignment by placing Lavatory (A) in desired mounting position.
• Apply plumber’s putty or caulking around the underside of rim near the edge as shown.
• Carefully lower lavatory in place, align, and press firmly.
• Wipe off excess sealant.
• Refer to figure 1.
• NOTE: ALLOW SEALANT TO SET BEFORE PROCEEDING.
• STEP #3
• Install drain, waste system, faucet and water supply according to manufacturer’s installation instructions.
•
NOTE: DRAIN, WASTE SYSTEM, FAUCET AND WATER SUPPLY NOT INCLUDED.
• NOTE: DO NOT OVERTIGHTEN DRAIN.
• Check for leakage.
A A
A
Counter top
Figure #1
Lavatory
Countertop
Apply
Silicone
Here
Apply sealant
here
Figure 1