Decolav 1112T - Manual

Customer Service
561-274-2110 (press 6)
www.decolav.com
Model NuMber: 1112T SerieS
P
roduct
d
escriPtion
P
roduct
M
easureMents
r
ecoMMended
a
ccessories
t
hank
Y
ou
B
efore
Y
ou
B
egin
1. Prior to installation, unpack your new DECOLAV ® product and inspect it. Keep the product in its original package until you are
ready to install it.
2. The wall must be square, plumb and level.
3. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall
supports, may be required.
4. Observe all local plumbing and building codes.
5. It is recommended that this installation be done with a minimum of two people. Do not install this fixture alone.
Dear Valued Customer,
DECOLAV ® would like to take this opportunity to thank you for your purchase – It is our sincere hope that you are
completely satisfied with your new product. We welcome and look forward to helping you create another unique look for
your next bathroom project.
Prior to installation, please take a moment to review all provided materials and hardware. For assistance with your new product, please contact our
dedicated DECOLAV
® customer service staff.
Sincerely,
Robert H. Mayer
Chief Executive Officer and President
• DECOLAV ® 9020 Mounting Ring
• DECOLAV ® 9290 Umbrella Drain or
• DECOLAV ® 9296 Grid Drain
• DECOLAV ® 9100 Decorative Bottle Trap
• Diameter: 17 inches (43.18 cm)
• Height: 5.5 inches (13.97 cm)
Tempered Transparent Glass Vessel
• Translucence TM Collection
• 12 mm Glass
• 17" (43.18 cm) Round
• Tempered Natural Glass
• For Above Counter Use
• This product meets or exceeds CSA B45.11-04/ IAPMO IGC 172-2005
standards for tempered glass plumbing fixtures.