Decolav 14104 - Manual

Please contact 1-866-332-6528 for further assistance
DecolaV.com
© Deco laV, inc. 2014
1
thank you for choosing decolav
care and cleaning
recommended tools
Pre-installation
use and care guide
We appreciate the trust and confidence you have placed in DecolaV ® through the purchase of our products. We strive to continually create and manufacture quality
products designed to enhance your home. Visit us online at decolav.com for our full line of products, and follow us on facebook, twitter and Pinterest for the most
up-to-date information, product care tips and trends.
• Do clean your DecolaV product to maintain its new appearance over the years. Wipe with a damp cloth and dry with a soft cloth. if necessary, a general mild soap and
water solution can be used.
• Do not clean the product with detergents, acids, abrasives, harsh cleaners or cloths with a coarse surface (s.o.s. ® pads, scotch Brite ® pads, etc.)
• Do not allow your DecolaV product to unnecessarily encounter other solid objects
• Do not oVertiGhten Drain. overtightening of the drain can damage your DecolaV
® product
• unpack your new DecolaV product and inspect it for damage. Keep the product in its original package until you are ready to install it
• the floor and walls must be square and level
• shut the water supply off when replacing an existing fixture
• Preparation of the floors and walls, including all additional wall supports, may be required
• observe all local plumbing and building codes
aBove counter vitreous china vessels
item # 14104
note: it is recommended that a professional contractor be
retained for the installation of this product. note: actual wood color, grain pattern and other appearance
characteristics may vary within each veneer species and grade.
assemBly instructions
note: use Decolav drain item #9290-cP/sn/Pn/DB,
#9296-cP/sn/Pn/DB or #9298-cP/sn/Pn/DB.
Decolav cannot guarantee leakage wih other manufacturer drains. note: use Decolav decorative bottle trap item #9102-cP/sn/
Pn/DB to complete the look.
• Prepare countertop by making a cutout in the counter top using the supplied cutout template
• make sure you leave enough room in between the wall and the vessel for faucet placement
• Put a little bit of sealant or plumbers putty on the bottom side of vessel, this is to keep the vessel from turning or moving once drain is installed
• line up the cutout in the countertop and the drain hole in the vessel. Place the vessel on the countertop and press firmly
• install drain, trap and faucet according to manufactures specifications
• sink style, shape and cutout may vary from the actual product. this document is for instructional purposes only
• Decolav will not be held responsible if supplied cutout template is not followed
tape measure plumber’s putty
or caulking
drill level pencil putty knife jig saw pipe wrench adjustable
Wrench
Bottom vieW
aBove counter
use cutout template provided