Decolav 14107 User Manual

Use and care guide, Semi-recessed vitreous china vessels

Please contact 1-866-332-6528 for further assistance

DecolaV.com

thank you for choosing decolav

care and cleaning

recommended tools

Pre-installation

use and care guide

We appreciate the trust and confidence you have placed in DecolaV

through the purchase of our products. We strive to continually create and manufacture quality

products designed to enhance your home. Visit us online at decolav.com for our full line of products, and follow us on facebook, twitter and Pinterest for the most
up-to-date information, product care tips and trends.

• Do clean your DecolaV product to maintain its new appearance over the years. Wipe with a damp cloth and dry with a soft cloth. if necessary, a general mild soap and

water solution can be used.

• Do not clean the product with detergents, acids, abrasives, harsh cleaners or cloths with a coarse surface (s.o.s.

pads, scotch Brite

pads, etc.)

• Do not allow your DecolaV product to unnecessarily encounter other solid objects
• Do not oVertiGhten Drain. overtightening of the drain can damage your DecolaV

product

• unpack your new DecolaV product and inspect it for damage. Keep the product in its original package until you are ready to install it
• the floor and walls must be square and level
• shut the water supply off when replacing an existing fixture
• Preparation of the floors and walls, including all additional wall supports, may be required
• observe all local plumbing and building codes

semi-recessed vitreous china vessels

item # 14107

note: it is recommended that a professional contractor be
retained for the installation of this product.

note: actual wood color, grain pattern and other appearance
characteristics may vary within each veneer species and grade.

assembly instructions

note: use Decolav drain item #9295-cP/sn/Pn/DB
or #9297-cP/sn/Pn/DB.
Decolav cannot guarantee leakage wih other manufacturer drains.

note: use Decolav decorative bottle trap item #9102-cP/sn/
Pn/DB to complete the look.

• Prepare countertop by making a cutout in the counter top using the supplied cutout template
• make sure you leave enough room in between the wall and the vessel for faucet placement
• Put a little bit of sealant or plumbers putty on the bottom side of vessel, this is to keep the vessel from turning or moving once drain is installed
• line up the cutout in the countertop and the drain hole in the vessel. Place the vessel on the countertop and press firmly
• install drain, trap and faucet according to manufactures specifications

• sink style, shape and cutout may vary from the actual product. this document is for instructional purposes only
• Decolav will not be held responsible if supplied cutout template is not followed

tape measure

plumber’s putty

or caulking

drill

level

pencil

putty knife

jig saw

pipe wrench

adjustable

Wrench

bottom vieW

semi-recessed

use cutout template provided