Decolav 1300 - Manual (Page 4)

• STEP #4 (Undermount)
o Refer to Figure #2, Mounting Clips Detail [Installation for solid surface countertops with a minimum
thickness of 1" (25mm). Installer must supply anchors for thinner countertops.]
o For solid surface, drill anchors hole 3/8" Dia. x 1/2" deep. Apply small amount of Epoxy (not
provided) to closed end of Threaded Knurl (C). Insert threaded knurl (threaded open end exposed).
o Apply Plumber’s Putty or Caulking around the topside of rim near the edge as shown.
o Carefully raise Lavatory in place, align, and press firmly.
o Wipe off excess sealant.
o Attach Undermount Clips (B) to hold Lavatory in place.
o NOTE: FOR WOOD COUNTERTOPS USE WOOD SCREWS AND ANCHORS,
WOOD SCREWS NOT PROVIDED.
o n OTE: ALLOW SEALANT TO SET BEFORE PROCEEDING!
MOdel nuMBer: 1300 series
4
MOdel nuMBer: 1300 series
5
installatiOn instructiOns
customer service: 561-274-2110
www.decolav.com
Let your dreams come aLive, your passions
become reaLity, be the envy of your neighbors
®
Apply plumber’s putty
or caulking here
Lavatory
Countertop
Mounting Clip Detail
Mounting Clip
Threaded Knurl
Machine Screw
Washer
Figure #2
• STEP #3 (Drop-In)
o Apply Plumber’s Putty or Caulking
around the underside of rim near
the edge as shown.
o Carefully lower Lavatory in
place, align, and press firmly.
o Wipe off excess sealant.
o Refer to Figure #1.
o Proceed to Step #5.
o NOTE: ALLOW SEALANT TO
SET BEFORE PROCEEDING!
Figure #1
Apply Plumber’s
Putty or Caulking
Here