Audiovox CMD-9000 - Manual (Page 43)

power on.
3. The clock alarm may not ring in AUTO mode, if you skip the alarm time traveling into an area with
different local time.
4. In place of the alarm sound, you can use Vibrator Alert (F8).
Countdown Timer (F45)
This feature alerts you when the countdown timer expires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press .
2. Enter the duration, 1 to 99 minutes.
3. Press to start. The indicator will be displayed.
4. When the timer expires, the alarm will ring for one minute with animation.
5. Press any key to stop ringer.
To Cancel the Countdown Timer
1. Press again after the timer has started.
2. “TIMER STOP?” is displayed with the remaining minutes to expire.
3. Scroll to “YES” and press to cancel. The indicator will go out.
Notes: 1. If the timer expires during a call, the alarm will ring after the call.
2. When you turn the power off, the countdown timer will be cancelled.
3. See Alert Tone Volume Control (F31) to change the alarm sound volume.
4. In place of the alarm sound, you can use Vibrator Alert (F8).
System Features
A/B System Selection (F51)
This feature permits you to select which cellular system (A or B) your phone uses. When you turn the phone on, it
remembers the last A/B setting and will scan the radio channels based on that setting. Leave this setting as it has been
preprogrammed unless you have a reason to alter the system selection.
To alter the system selection:
1. Press . The current mode will be displayed.
2. You can change the current mode by or .
3. Press to set.
· AUTO ROAM – Auto Roam Mode
The phone will scan the priority systems first, and then non-priority systems. For more information as to how this mode
works, see Enhanced Roaming.
· HOME – Home Only Mode