Audiovox CMD-9000 - Manual (Page 39)

Setting Tones (F36)
This is a group of 9 functions related to the setting of tones.
Key Tone Length (F36-1)
This feature selects the duration of the tone length when a key is pressed.
1. Press and .
2. You can change the current mode by or .
3. Press to set.
· NORMAL – Normal Mode
Tone is heard as long as the key is being pressed.
· SHORT – Short Mode
Tone is heard for a short time even if the key remains pressed.
Single Alert Beep Tone (F36-2)
This feature is used to signal incoming call with only a single beep. This feature can only be used with the “silent” alert
mode. See Alert Tone Volume Control (F31).
1. Press and .
2. You can turn this feature on/off by or .
3. Press to set.
Voice Mail Alert (F36-3)
This feature audibly alerts you when a Voice Mail Notification is received. A Voice Mail Notification is received if your
Voice Mail contains messages that have not been reviewed.
1. Press and .
2. You can turn this feature on/off by or .
3. Press to set.
Text Message Alert (F36-4)
This feature audibly alerts you when a Text Message is received.
1. Press and .
2. You can turn this feature on/off by or .
3. Press to set.
Caller ID Alert (F36-5)