Beijer Electronics NA-9379 - Manual (Page 5)

NA-9379
Specification
Revision 1.02
FnBus PIO N/A Page 5
2. NA-9379 (FNIO MODBUS PROGRAMMABLE I/O)
2.1. NA-9379 Specification
Items Specification
Programmable Specification
Programming CoDeSys V3.5 SP3 Patch 1
Program Memory 512 KBytes
Data Memory 512 Kbytes
%IW0~%IW639 (640 word Input and Internal memory)
%QW0~%QW639 (640 word Output and Internal memory)
%MW0~%MW639(640 word Internal memory)
Non-Volatile Memory 32 KBytes (Retain : 16 KBytes, Flag : 16 Kbytes)
Run-Time System Multiple PLC Task
Program Languages IEC 61131-3 (LD, IL, ST, FBD, SFC)
RTC Retain Time : 6 days
Accuracy : < 2min/month
Max. Task 2
Max. Cycle Task 2
Max. Status Task 1
Process Time 3us (100 Instruction)
Interface Specification
Adapter Type Master & Slave Node (Modbus TCP), Max. 6EA
Max. Expantsion Module 32 Slots
Max. Input Size 126 Words (252 Byte)
Max. Output Size 126 Words (252 Byte)
Max. Nodes Limited by Ethernet Specification
Baud rate 10/100Mbps, Auto-negotiation, Full Duplex
Interface Connector RJ-45 socket * 2pcs
Protocol Modbus TCP, DHCP, BOOTP, SNMP
Max. Socket 18 (UDP : 6, TCP : 12, TCP_LISTEN : 6)
Other Serial Port RS232/485 for Modbus RTU, Touch Pannel or IOGuide
Serial Configuration (RS232/485) Node : 1 (default)
Baud Rate : 38400 (default)
Data bit : 8 (default)
Parity bit : No parity (default)
Stop bit : 1 (default)
Indicator 5 LEDs
1 Green/Red, Module Status (MOD)
1 Green/Red, Network Status (NET)
1 Green, Run Status (RUN)
1 Green/Red, FnBus Status (I/O)
1 Green, Field Power Status (Field Power)
General specification
System Power Supply voltage : 24Vdc nominal
Supply voltage range : 11~28.8Vdc
Protection : Output current limit (Min. 1.5A)
Reverse polarity protection
Power Dissipation 110mA typical @ 24Vdc
Current for I/O Module 1.5A @ 5Vdc
Isolation System power to internal logic : Non-isolation
PRELIMINARY