Beijer Electronics NA-9379 - Manual (Page 8)

* Specifications and designs may be changed without advance Notice.
CREVIS Co., Ltd
29-4, Gigok-ro, Giheung-gu, Yongin-si, Gyeonggi-do, Korea 446-930
TEL : +82-31-899-4599 FAX : +82-31-899-4509
Homepage : www.crevis.co.kr
6. Additional Function
(IP Address : 192.168.100.10 / User ID : 1 , Password : 1)
After setting up the hold down push button , Power off and on in order to start the IAP mode.
Then, FW update will be available via the FireFox browser.
5. Toggle Switch, Push Button
Status Module is Description
Up Run PLC Run
Down Stop
PLC Stop
(Fault Action is performed)
Status Module is Description
Press and release Reset Reset the PLC and then stop
Hold down and
reset the power
IAP mode
Available for firmware
download using FireFox
▶5-1. Toggle Switch
▶5-2. Push Button
▶6-2. Select BOOTP/DHCP Server
Depending on the value of the register of address 0x160B, Select the IP configuration method.
Not used : 0x0000 / BOOTP Server : 0x8000(default) / DHCP Server : 0x8001
▶6-1. IAP Functionality
Programmable I/O