TurboChef Technologies G5 User Manual

Page 35

eSHOOTING

Issue

Possible Cause(s)

resolution

F1: Blower Running

Status Bad

- Oven power interrupted.

- Verify the wall circuit breaker is on.
Reset the breaker and then power the
oven on.
- Place the oven in the off state and

unplug the oven – leave for two

minutes. Re-plug in the oven, switch on

the isolator/main power supply, and

touch the “Power” icon.

F5, F11, F12:

Magnetron Over
Temperature

- Blockage of cool air into the
oven.

- Rear cooling fan exhaust

guard(s) clogged.

- Remove anything that may be obstruct-

ing the flow of cool air into the side/rear

oven panels.
- Make sure the rear fans are free of debris.