Pulsafeeder PULSAlarm User Manual
Page 21
21
Component Exposure Limits
There are no components with workplace exposure limits.
Engineering Controls
Local Ventilation:
None should be needed.
General Ventilation:
Recommended.
Personal Protective Equipment for Routine Handling
Eyes:
Use proper protection - safety glasses as a minimum.
Skin:
Washing at mealtime and end of shift is adequate.
Suitable Gloves: No special protection needed.
Inhalation:
No respiratory protection should be needed.
Suitable Respirator: None should be needed.
Personal Protective Equipment for Spills
Eyes:
Use proper protection - safety glasses as a minimum.
Skin:
Washing at mealtime and end of shift is adequate.
Inhalation/Suitable Respirator: No respiratory protection should be needed.
Precautionary Measures: Avoid eye contact. Use reasonable care.
Comments: When heated to temperatures above 150 degrees C in the presence of air, product can form
formaldehyde vapors. Formaldehyde is a potential cancer hazard, a known skin
and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive
system. Safe handling conditions may be maintained by keeping vapor concentrations
within the OSHA Permissible Exposure Limit for formaldehyde.
Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray
applications may require added precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form:
Liquid
Color:
Colorless
Odor:
Odorless
Specific Gravity @ 25°C:
0.915
Viscosity:
5 cSt
Freezing/Melting Point:
Not determined.
Boiling Point:
> 35C/95F
Vapor Pressure @ 25°C:
Not determined.
Vapor Density:
Not determined.
Solubility in Water:
Not determined.
pH:
Not determined.
Volatile Content:
Not determined.
Note: The above information is not intended for use in preparing product specifications. Contact Dow Corning before
writing specifications.
10. STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Hazardous Polymerization:
Hazardous polymerization will not occur.
Conditions to Avoid:
None.
Materials to Avoid:
Oxidizing material can cause a reaction.
11. TOXICOLOGICAL INFORMATION
Acute Toxicology Data for Product Complete information is not yet available.
Component Toxicology Information
Special Hazard Information on Components
12. ECOLOGICAL INFORMATION
Environmental Fate and Distribution
Air:
This product is a high molecular weight liquid polymer which has a very low vapour
pressure (<1 mm Hg). As a result it is unlikely to become an atmospheric contaminant