Pitco Frialator I8 Water Cooker Controller User Manual

Page 7

I8 Water Cooker Computer Operations

Pitco P/N PP11375

L20-308 Rev 1 (05/11)

3.5

Control or Timer Mode Setting:

This control can operate in one of two basic modes, Control or Timer mode. The default mode
setting is Control mode, and is the setting for normal operation. In this mode, the cook timers are
active and the heat control outputs are enabled to control the heating of the vat. In Timer mode,
the cook timers are active, but the heat control outputs are disabled.

NOTE: Do not use the Timer mode setting on Solstice fryer models.

With the control display showing [SELECT ], press product key 7. The display will show
the current setting of either [CONTROL ] or [TIMER ]. Press product key 0 to scroll
between the two options. Press the program key to save this setting. The control display
will show [PROGRAM ]. Press product key 0 to select more options below(display shows
[SELECT ]) or press the program key to return to normal operation(display shows either
[READY], [ACT xxx’F], or [FILLING ]).

4.0 Control Alarm Displays:

This control continually monitors the basic overall functions of the appliance. If any faults
are detected, the control will turn all outputs OFF, suspend any cooking functions that
may be in progress and sound an alarm. One of several alarm messages detailed below
will appear on the control display. If one if these alarms occur, turn off the control(see
section 1.2). to reset the alarm.

4.1 Open Probe Alarm:

[PROBE OP]. Open temperature probe detection is standard on all Pitco controls. This
alarm will occur if the temperature probe is detected to be open. All heating and cooking
functions are suspended if this alarm occurs.

4.2 High Temperature Alarm:

[HIGH TMP]. This alarm will occur if the vat temperature exceeds the set temperature
value by 35°F. If a high vat temperature alarm occurs, all heating and cooking functions
are suspended.

4.3 Drain Valve Alarm:

[DRAINING] and [TURN OFF] (alternating). This alarm message will appear on the
control display if the drain valve on the appliance is opened while the control is ON. All
heating and cooking functions are suspended if this alarm occurs.