Pitco Frialator I8 Water Cooker Controller User Manual

Page 3

I8 Water Cooker Computer Operations

Pitco P/N PP11375

L20-308 Rev 1 (05/11)

1.0 Key Locations and Functions:

Program Key Temperature Key Clock Key

Product Keys 8 Digit Display Product Keys

1.1 To turn the appliance ON:

If power is applied to the appliance(plugged in) and the control is off, the display will be blank.
Turn on the control by pressing the power on/off switch located on the right side of the control to
the ON position. The control will then briefly display the software version number, and then
display either [READY], [ACT xxx’F] (where xxx is the current vat temperature) or [FILLING] if
the appliance is being filled with water.

1.2 To turn the appliance OFF:

Press the power on/off switch to the OFF position. The control display will be blank.

1.3

To start a cook:

When the control display shows either [READY] or [ACT xxx’F], press the desired product
key. For example, press product key 4 to start cook timer 4. The key indicator above the
product key will begin to flash, and the cook timer should appear on the computer display.
If multiple cook timers are running, the cook timer with the least amount of time remaining
will be displayed.

1.4 To cancel a cook:

Press the product key to cancel a running cook timer. If there are no other cook timers running,
the computer will return to normal operation and display either [READY] or [ACT xxx’F] (where
xxx is the current vat temperature).

1.5 To Check Actual and Set Temperatures:

Press the temperature key to check the actual vat temperature. The control will

Key Indicators