Nor-Lake Topping and Storage Dipping Ice Cream Freezers - Manual (Page 4)

06/12 Rev. B 143537 4
PRE-INSTALLATION INSTRUCTIONS
INSPECTION FOR SHIPPING DAMAGE
You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for
damage as soon as they arrive. If damage is noted to shipping crates or cartons or if a shortage is found, note this
on the bill of lading (all copies) prior to signing.
If damage is discovered when the cabinet is uncrated, immediately call the delivering truck line and follow up the
call with a written report indicating concealed damage to your shipment. Ask for an immediate inspection of your
concealed damage item. Crating material must be retained to show the inspector from the truck line.
INSTALLATION INSTRUCTIONS
GENERAL INSTRUCTIONS
1. Be sure the equipment is properly installed by competent service people.
2. Keep the equipment clean and sanitary so it will meet your local sanitation codes.
3. Rotate your stock so that older stock does not accumulate. This is especially important for ice
cream. A "First-In, First-Out" rotation practice will keep the products in good salable condition.
4. Do not place product in the cabinet when it is soft or partially thawed. Also, product should not be put in the
cabinet for at least 6 hours after it is started.
5. Stock cabinets as quickly as possible, exposing only small quantities to store temperatures for short periods of
time.
6. After removing Power Cord from compressor compartment be sure both power connections to thermostat are
securely in place.
NOTICE TO STORE OWNERS / MANAGERS
Moisture or liquid around or under the cabinet is a potential slip/fall hazard for persons walking by or
working in the general area of the cabinet. Any cabinet malfunction or housekeeping problem that creates
a slip/fall hazard around or under the cabinet should be corrected immediately.
If moisture or liquid is observed around or under the cabinet, an immediate investigation should be made by
qualified personnel to determine the source of the moisture or liquid. The investigation should determine if the
cabinet is malfunctioning or if there is a drainpipe leaking.