Cooling the oven down before cleaning 10 – Merrychef eikon e3 User Manual
Page 21

Service & Parts Manual original Instructions
Part Number 32Z3812 US
Issue 1
21
PR
ODUC
T
DE
TAILS
1
5
2
3
4
WARNING: DO NOT USE CAUSTIC
CLEANERS ON ANY PART OF THE
OVEN OR OVEN CAVITY AS IT WILL
CAUSE PERMANENT DAMAGE TO THE
CATALYTIC CONVERTORS
Oven cool down
10.1
IMPORTANT: the oven must be cooled down
before the cleaning processes are carried out.
1. In Full Serve mode, select the CLEANING symbol
from the main menu.
2. In Full or Quick Serve mode, select the blue
thermometer symbol to disable heating and start
the cooling cycle.
3. Taking all necessary precautions place a suitable
heaped container of ice, into the hot oven cavity.
Select the OK symbol to continue.
4. The cooling progress is displayed and takes
approximately 30 minutes.
5. The oven is now ready for cleaning. Select OK on
the screen after completing each stage.
COOLING THE OVEN DOWN BEFORE CLEANING
10
Preparing to clean the oven
10.2
For the oven to operate at peak efficiency, the
cavity, door, air filter and grease filter must be kept
clean.
A daily cleaning routine will ensure that you comply
with the required hygiene standards and will help to
maintain and prolong the efficiency of your oven.
Equipment required (not supplied):
Non-caustic proprietary branded oven cleaner,
heat proof gloves, protective rubber gloves, non–
abrasive nylon scrub pad, cleaning towel and cloths,
eye protection and dust mask (optional).
CAUTION: WEAR PROTECTIVE RUBBER GLOVES
WHEN CLEANING THE OVEN.
NEVER use sharp implements or harsh abrasives
on any part of the oven.