Merrychef eikon e3 User Manual

Page 20

Service & Parts Manual original Instructions
Part Number 32Z3812 US
Issue 1

ODUC

TAILS

USB oven programs (J)

9.8

IMPORTANT: Downloading from a USB will clear

all the existing programs.
Check that the key has the correct number/code

for the programs you want to load into the oven

memory.

Select USB from the settings screen.

9.8.1

Slide the USB cover (logo on the oven front)

9.8.2

upwards to insert the USB into the slot.

When the inserted USB stick has finished

9.8.3

flashing, select the required USB symbol, for

example; RECIPES.

Select the new file using the scroll arrows if

9.8.4

required to locate the file. Note; a tinted band over a

file name indicates the file is not available to use.

Double check the file is correct before

9.8.5

selecting OK, if not, select ‘X’ and locate the correct

file.

Progress of the file update is displayed. Once

9.8.6

completed the oven restarts and commences

heating up to the PREHEAT temperature ready to

cook.

Remove the USB and keep in a safe place.

9.8.7

Reposition the USB cover.

Restore Factory Defaults (k)

9.9

Select the factory symbol to replace the

9.9.1

existing oven settings with the original factory

default settings. Note; this action cannot be undone.

Select OK, or select the red cross to cancel

9.9.2

and keep the existing settings.

Temperature Band (L)

9.10

Select the ‘Temp Band’ symbol at which the

9.10.1

oven controls i.e. ±10°C.

Select the required temperature band

9.10.2

checkbox, shown by a green tick. Note; although

the lowest practical Temp Band should be used, if

the set oven temperature falls by more than the

selected Temp Band, the ready to cook mode and

Temp Band are deactivated until the oven reaches

the preheat temperature.

Change Password (M)

9.11

Select the key symbol to change the oven

9.11.1

passwords.

Select the oven Settings or Service symbol.

9.11.2

Enter the existing password and select OK to

9.11.3

confirm.

Enter the new password, select OK.

9.11.4

Confirm new password, select OK.

9.11.5