HOUNO M ovens - Manual (Page 4)

4
(1) Main switch
Turn the main switch to the desired operating mode (9 – 12).
Set the time switch (2), the oven chamber temperature switch (3) or the core
temperature switch (4) and the steamer starts automatically
Before the steamer starts, all displays and control lamps light up for approx. 2 seconds to
indicate that all functions are being automatically tested.
(2) Time
The time can be set from 1 min. to 3 hours.
When the time has run out, the steamer automatically stops and an alarm sounds.
The pre-set time can also be changed while the program is running.
Continuous operation
Set the steamer at continuous operation by turning past 3 hours until --:-- appears.
If the core temperature is on at the same time, the steamer stops when the core temperature is
reached.
(3) Oven chamber temperature
The temperature range depends on the operating mode chosen:-
•HOT AIR 20 - 250°C
•COMBI STEAMING 20 - 250°C
•STEAMING 20 - 100°C
The temperature can be changed any time during the program.
(4) Core temperature
The core temperature range is 20 – 99°C.
(5) Display for core temperature
When the core temperature is activated, this is shown in the display. When the steamer is off,
the pre-set temperature is shown; when the steamer is on, the actual temperature is shown.