HOUNO BM ovens - Manual (Page 6)

6
(7) Checking key: Actual temperature in oven chamber
Check the actual temperature in the oven chamber by pressing . The actual temperature
is shown as long as is activated.
(8) Display for humidity pulsing
Shows, at the start of a program , the pre-set number of seconds for humidity pulsing.
When the program starts, the countdown starts. When the humidity pulsing stops, the display
goes out.
The control lamp in the right-hand corner of the display lights as long as humidity is added.
(9) Function key: Humidity pulsing
Set the desired time for humidity pulsing by pressing . The display (8) flashes. Set the time
between 1 and 99 seconds with the arrow keys
.
When the time is set, press again. If you do not press the key within a few seconds, the
setting is automatically ‘locked’.
The pre-set time cannot be changed while the program is running, so if you require further
humidity pulsing in the course of the program, use manual humidity pulsing .
(10) ON/OFF humidity pulsing
Timer for humidity pulsing on or off.
(12) PROGRAMS
The oven has five operating/baking modes
and one proving mode .
The operating modes have been pre-programmed by the manufacturer. Check that the settings
match the products.
Note that each function can be adapted to each of the operating modes.
Time
Temperature
Humidity pulsing
Fan speed
Exhaust
When all the settings for the program in question have been entered, store the program by
pressing
for 7 – 10 seconds until you hear a beep.