HOUNO BM ovens - Manual (Page 5)

5
(1) Time display
Shows the time remaining during a program.
BAKEMATIC Line is equipped with an automatic fault-detecting system. In the event of a
malfunction, an error code will show in the time display (see list of error codes p. 21).
(2) Function key: Time
Set the time by pressing . The display flashes.
Set the time between 1 minute and 23 hours and 59 minutes with the arrow keys . When
the time is set, press again. If you do not press the key, the time is automatically ‘locked’
after a few seconds.
When the baking time has run out, the oven is automatically switched off and an alarm sounds.
The time can also be adjusted during the program.
(3) Manual time control
The oven is set at continuous operation without the use of a timer/time function. When you
press , the oven operates continuously until you stop it by pressing . In the display,
four dashes ‘-- -- ‘appear.
(4+11) Setting of time temperature and humidity
Set the time, oven chamber temperature and humidity level with the arrow keys .
(5) Display for temperature in oven chamber
When the desired temperature has been set, it is shown in the display.
If the control lamp in the symbol lights , the desired temperature has not been reached.
(6) Function key: Temperature in oven chamber
Set the temperature by pressing . The display flashes. Set the temperature
with the arrow keys
Then press again.
The temperature can be set in the following intervals:
20 - 250°C for baking modes
20 - 40°C for proving.
The temperature can also be changed during the program.