HOUNO Visual Cooking I K - Manual (Page 12)

K – ver. 1.3 – Sept. 2005 12
15 CombiClean For ovens with the automatic cleaning system, CombiClean:
If problems occur with respect to some of the CombiClean error messages,
the program can be deactivated. 0 is shown in step display. Then activate the
semiautomatic cleaning program by pressing START (no wash arm required)
and follow the instructions in the display.
16 Regenera-
ting/reheating Setting of humidity pulsing. Press temperature key and turn switch to change
setting. The value indicates the number of seconds between each injection
into the oven chamber. If the value is increased, less humidity is added to the
oven chamber, if the value is reduced, more humidity is added.
17 Injection
interval 1 Combi steaming 1: See 16
18 Injection
interval 2 Combi steaming 2: See 16
19 Store all Press ALARM to make a backup of all settings in all modes and programs.
20 Retrieve all Press ALARM to retrieve all settings saved in all modes and programs.
21 Retrieve ori-
ginal menu Press ALARM and retrieve all programs preset by the manufacturer. In step
display, choose which program (0 – 4) to retrieve and press ALARM.
22 Interval
screen Interval of seconds before interval screen becomes active. 0 = 0 sec. / 1 = 10
sec. / 2 = 30 sec. / 3 = 60 sec./ 4 = 180 sec. / 5 = 600 sec. Change by
pressing STEP.
23 Language Change by pressing STEP (1 – 4).
24 SW update Updating of software. Special memory key required. Contact your local
distributor.