Operation panel – HOUNO K & C User Manual
Page 5

C & K – ver. 3.x – August 2009 
 
5
 
 
 
 
 
 
 
 
 
 
(1) If the oven does not incorporate CombiWash, the manually operated cleaning system can
be activated by pressing the PRG key and turning the turn switch until CLEANING appears 
in the display. 
 
(2) The C model has no steam generator, but this mode makes it possible to steam in the oven 
anyway. At temperatures between 65 and 100°C, you can steam all kinds of vegetables, 
rice, pasta, meat and fish. In the following, this mode will be referred to as “Combi 
steaming 3”. 
 
 
 
 
PRG
HOT AIR 30-250°C. All modes 
and all optional extras are 
described on following pages. 
Preheating up to 300°C is a 
standard feature on models C 
and K. 
REGENERATING / COMBI 
STEAMING 
Change between the modes 
by pressing 
REGENERATING 
COMBI STEAMING 1 
COMBI STEAMING 2 
STEAMING 30-120°C (2). 
Used for manual humidity 
pulsing in HOT AIR during 
preparation. 
EXHAUST is open when 
control lamp is on. 
Low FAN SPEED is active 
when control lamp is on. 
SETTING CORE TEMP. PROBE 
(optional extra). Press once 
and set with TURN SWITCH. 
Deactivate by turning switch 
past the permitted
temp. range
of 30-99°C.
TEMPERATURE SETTING. Press 
once and set temperature with 
TURN SWITCH. Enter by 
pressing symbol again. 
PROGRAMMES. Press once and 
choose program with TURN 
SWITCH. Editing and deleting 
are described on following 
pages. 
ON/OFF
STEP shows current step when 
PROGRAMME mode is active. 
Control lamp next to ALARM 
lights up when alarm after a 
step has been chosen (when 
PRG is active). 
Main switch
TIME SETTING. Press once and 
set time with TURN SWITCH. 4 
hours is maximum. Confirm by 
pressing TIME. 
Operation panel
Turn switch
