Custom Brackets CB Gimbal-LB - Manual (Page 2)

Tilt lock knob
Tilt drag knob
Pan lock knob
Pan drag knob
2 degree markings
Degree indicator line
Bubble level
PAN
TILT
Lens lock lever
Arm lock lever
push in and turn
to lock and unlock
Setup lever
for balancing lens, changing cameras,
and secure travel while on tripod
Upright lock lever
Lens platform
lock lever
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or workmanship. Warranty does not cover repairs due to customer abuse,
negligence, impact or any modifications made by the customer. All knobs are installed using “loctite” to prevent them from unscrewing. Hand tightening is sufficient to secure any component and the lens
plate. Excessive force unscrewing will cause the knobs to unscrew and void warranty. Warranty service is available by returning the CB Gimbal or component (shipping prepaid) to Custom Brackets. All
returns must include a return authorization (RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a copy of the sales receipt.
Repair service is available by returning the CB Gimbal product (shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number (contact Custom Brackets to obtain), letter
explaining the problem, and a copy of the sales receipt. A repair cost will be issued and must be approved prior to any repairs. Shipping charges are the responsibility of the customer.
The CB Gimbal product line is designed to be completely maintenance-free. The bearing rotation tension is factory set. Attempting to adjust the tension will void the warranty and may result in damage to
the camera or lens.
USA 5 Year Warranty
Repair
Maintenance
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or workmanship. Warranty does not cover repairs due to customer abuse,
negligence, impact or any modifications made by the customer. All knobs are installed using “loctite” to prevent them from unscrewing. Hand tightening is sufficient to secure any component and the lens
plate. Excessive force unscrewing will cause the knobs to unscrew and void warranty. Limitation to the warranty - after year one shipping charges are not covered. Warranty service is available by returning
the CB Gimbal or component (shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a
copy of the sales receipt.
International 5 Year Limited Warranty
The CB Gimbal has many unique features found only in our Custom Brackets gimbal line. It is constructed from aircraft aluminum that is “hard anodized” for a lightweight and scratch resistent finish. All knobs
have an ergonomic design and are machined from aluminum to prevent breakage. All of the fasteners are made from stainless steel to resist corrosion. The pan and tilt knobs have a rubberized coating for
comfort, traction, and to resist cold weather. The CB Gimbal has a setup / travel lever that is used for balancing the lens and securing for travel from location to another when the lens is still attached.
CB Gimbal Facts
- - - CB Gimbal Features - - -
* * * * * Note * * * * *
Adjusting the lens center height
For balancing the lens, position the lens
slighty above the center of the tilt axis
(best position is when lens stays in
position without drag or lock)
- - - CB Gimbal Basic Features - - -
TILT
PAN
Tilt lock knob
Tilt drag knob
Lens lock lever
push in and turn
to lock and unlock
Ball Head
Customer supplied
Arca Swiss type clamp
* * * * * Note * * * * *
Use Ball Head for all
panning functions
Center of Tilt Axis
in-line with arm lock lever