Custom Brackets QRA-C Kit - Manual

Attaching your camera to the QRA-C
Attaching the QRA-C to the bracket
Made in USA
Using 2 cameras: (1) without battery pack / vertical grip and (1) with battery pack / vertical grip
Requires (1) additional QRA-C & (1) QR-C Kit
Figure #5
“D” screw
(camera clamp)
Configuring the QRA-C for the camera
Figure #2
The quick release camera plate receiver
(QRA-C) is packaged for cameras without
battery packs / add-on vertical grips ( figure #1 ).
Cameras with battery packs / add-on vertical
grips, remove the (2) screws and reposition the
vertical support and reinstall the (2) screws per
( figure #2 ).
Figure #1
Vertical support
Vertical support
Screws
Screws
Attach the quick release camera plate receiver (QRA-C) to the bracket using the two screws
(8-32 threads x 1/2” long socket head) and Allen wrench (5/64”) supplied with the bracket.
Note: Loosen the “D” screw (see figure #5 below) and slide the receiver back to install screws.
Cameras without battery packs / add on vertical grips ( figure #3 )
Cameras with battery packs / add on vertical grips ( figure #4 )
Figure #3
Screws
Figure #4
Loosen the “D” screw, slide the quick release
camera plate receiver all the way back, install
camera with (Arca Swiss style plate) attached
(center lens), tighten the “D” screw (camera
clamp - see figure #3 - #4 above). Move camera
forward, still allowing the camera to be quick
released from the bracket.
Screws
“D” screw
In forward position
“D” screw
In backward position
“D” screw
(camera clamp)
Receiver
Q R A - C , Q R A - C K i t , C K - 5 0 0 I N S T R U C T I O N S
phone: 446-446-0819
toll free: 800-530-2289
website: www.custombrackets.com
email: [email protected]
32 Alpha Park
Cleveland, Ohio 44143
Innovative Camera Supports
Replacing the Bottom Plate with the CK-500
Figure #7
The bracket is packaged with a Custom Brackets’ style bottom plate which will be removed in order
to attach the Arca Swiss style bottom plate. Using the Allen wrench (1/8”) supplied with the QRA-C /
QRA-C Kit / CK-500, unscrew the two screws (10-32 threads by 1/2” long flat head) from underneath
the bracket ( Figure #6 ). Once the bottom plate is removed, use the two new screws supplied (10-32
threads by 1/2” long flat head) and screw the Arca Swiss style bottom plate in according to Figure #7 .
Once in place, tighten the screws.
Figure #6
Screws Screws
For a period of one (1) year from date of purchase, Custom Brackets will repair or replace free
of charge, any defect in material or workmanship. Warranty does not cover repairs due to abuse,
negligence, impact or any modifications made by the customer. Excessive force unscrewing knobs
will void warranty. Warranty service is available by returning the product (shipping prepaid) to Custom
Brackets. All returns must include a return authorization (RA) number (contact Custom Brackets to
obtain), letter explaining the problem, and a copy of the sales receipt.
USA: One Year Warranty
Repair service is available by returning the products (shipping prepaid) to Custom Brackets. All returns
must include a return authorization (RA) number (contact Custom Brackets to obtain), letter explaining the
problem, and a copy of the sales receipt. A repair cost will be issued and must be approved prior to any
repairs. Shipping charges are the responsibility of the customer.
Repair
For a period of one (1) year from date of purchase, Custom Brackets will repair or replace free of
charge, any defect in material or workmanship. Warranty does not cover repairs due to abuse,
negligence, impact or any modifications made by the customer. Excessive force unscrewing knobs
will void warranty. Warranty service is available by returning the product (shipping prepaid) to Custom
Brackets. All returns must include a return authorization (RA) number (email [email protected]
to obtain), letter explaining the problem, and a copy of the sales receipt.
International: One Year Limited Warranty