Antunes, AJ SE-4200/4400 - Manual (Page 15)

SE-4200/4400 WATER FILTRATION SYSTEM
15 P/N 1010852 Rev. C 04/06
OPERATION (continued)
Operating the Unit
After all of the menus have been programed, the sys-
tem can be activated.
1. To start the filtration operation, press the RUN
button. The system will perform a BORE AIR
RELEASE function and return to FILTER MODE.
2. To stop any function, press the STOP button.
NOTE: With the STOP button pressed, all valves are
activated and the system is pressure free.
When a password is actively protecting the system, you
will be prompted for that password any time you press
the Menu button. Follow these steps to access Menu
options when the system is password protected.
1. Press the Stop Button. The system will display
the STOP MODE display.
2. Press the Menu Button. The system will display
the ENTER PASSWORD display.
3. Use the Up and Down arrow buttons to enter the
first character of your password and then press
the Enter button. Repeat until the password has
been selected and press the Enter button. The
system displays the SET PASSWORD display. You
may now scroll to your desired menu option and
make any desired changes.
If you enter the wrong password, the system will
return to Stop Mode. Press the Menu button to
enter the password again. If you have forgotten
your password, contact the manufacturer.
WARNING
Once a password has been activated, that pass-
word will be required to change any settings. DO
NOT lose your password! Keep it in a safe place.
Contact the manufacturer if you have lost your
password.