Alliance Laundry Systems H2641 - Manual (Page 25)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
23 800536
Operation Instructions for
MDC Washers
IMPORTANT: Prior to first wash, use an all-
purpose cleaner, or a detergent and water solution,
and a damp cloth to remove shipping dust from
inside of washtub.
Step 1: Set Fabric Selector and Wash
Temperature
Push touchpad for NORMAL/HOT, NORMAL/
WARM, PERM PRESS/WARM or DELICATES/
COLD cycle. Light indicates selection.
NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.
Figure 22
Step 2: Add Laundry Supplies
Open dispenser drawer. Measure and add low sudsing
detergent (1), bleach (2) and fabric softener (3) to the
dispenser drawer (refer to Figure 23). Close dispenser
drawer.
IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using 1/2 of
the recommended amount.
Figure 23
FLW1920N
FLW1920N
H284I
1 Detergent
2 Bleach
3 Fabric Softener
3
2
1
Dispenser drawer requires a special tool
for removal. Contact a service person if
removal is necessary.
W236
CAUTION