APC AP9211 - Manual (Page 9)

MasterSwitch Power Distribution Unit User’s Guide 5
MasterSwitch
Power Distribution Unit
Managing the MasterSwitch PDU
Management Interfaces
Management
Options
After you configure a MasterSwitch PDU with the proper network
settings, you can manage the unit remotely through its Web, Telnet
Control Console,
SNMP, and WAP interfaces.
You can also use the Control Console to manage a MasterSwitch PDU
locally through a serial connection.
Only one user at a time can access a MasterSwitch PDU . Serial
interface users (using a terminal emulator) have precedence over Telnet
users, and Telnet users have precedence over Web and WAP users.
Web interface
To access and log on to the Web interface of the MasterSwitch PDU:
1. In the URL Location field of the Web browser, do one of the
following:
• If the Web port of the MasterSwitch PDU is set to the default
value of 80, enter http:// followed by the unit’s IP address.
The following example shows a typical IP address:
http://170.241.17.51
• If the Web port of the MasterSwitch PDU is set to a value other
than the default of 80 , enter the System IP address (the IP
address of the unit) followed by a colon and the configured Web
port value (8000 in the following example).
http://170.241.17.51:8000
• If there is a DNS server entry for the MasterSwitch PDU , you
can choose to enter the DNS name to access the unit.
Continued on next page