Cutting.before cutting. slow, Ground speed of, Tractor but keep – Alamo Exten-A-Kut II User Manual

Page 132: Engine running at full, Pto rpm. cutting, Lower may help, Dull blades. sharpen or replace, Blades, Height of cutter lower at see cutting height, Rear or front. instructions

OPERATION

EK II 03/09

Operation Section 3-40

OPERA

ION

Streaking Conditions

Conditions too wet for

Allow grass to dry

cutting.before cutting.

Slow
ground speed of
tractor but keep
engine running at full
PTO rpm. Cutting
lower may help.

Dull blades.

Sharpen or replace
blades.

Height of cutter lower at

See Cutting Height

rear or front.

Instructions.

Blade Bolts

Bolts not tightened.

Tighten bolts to
350 ft.lbs.

Bolt hole elongated or

Replace Bushing or

oversized.

Blade Carrier.

Locknut worn out.

Replace Locknut.

Blades Wears Too Fast

Cutting in sandy conditions. Increase cutting height.
Cutting in rocky conditions.

Increase cutting height.