Asus Motherboard NR-LSR - Manual (Page 72)

4-20 Chapter 4: BIOS Setup
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI
functions over other SCSI controllers. Configuration options: [No] [Yes]
ONB Primary SCSI Term [Enabled]
ONB Secondary SCSI Term [Enabled]
This field allows you to enable or disable the onboard termination for the
primary and secondary SCSI channels. Configuration options: [Enabled]
[Disabled]
Primary VGA BIOS First [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration
options: [PCI VGA Card] [Onboard VGA]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Onboard LAN Controller [Enabled
Onboard 2nd LAN Controller [Enabled]
These fields allow you to enable or disable the onboard LAN controllers.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Enabled]
Onboard 2nd LAN Boot ROM [Enabled]
When set to [Enabled], these fields allow the system to boot from the
network using the onboard LAN controller boot ROM. Configuration
options: [Disabled] [Enabled]