Agilent Technologies 6028A - Manual (Page 112)

Standard Commands for Programmable Instruments (SCPI) 112
Command Summary (continued)
Subsystem Commands
Command Parameters
OUTP[:STAT] {0|OFF}[,NOR] {l|ON}[,NOR]
OUTP? (none)
OUTP:PROT:CLE (none)
OUTP:PROT:DEL < space > < NR1 > or < space > MIN or < space > MAX
ABOR (none)
OUTP:PROT:DEL? (none) or MlN or MAX
OUTP:REL:POL NORM or REV
OUTP:REL:POL? (none)
OUTP:REL[:STAT] 0 or OFF 1 or ON
OUTP:REL:? (none)
STAT:OPER:COND? (none)
STAT:OPER:ENAB
STAT:OPER:ENAB? (none)
STAT:OPER[:EVEN]? (none)
STAT:OPER:NTR < space > < NRf >
STAT:OPER:NTR? (none)
STAT:OPER:PTR < space > < NRf >
STAT:OPER:PTR? (none)
STAT:PRES (none)
STAT:QUES:COND? (none)
STAT:QUES:ENAB < space > < NRf >
STAT:QUES:ENAB? (none)
STAT:QUESL:EVEN]? (none)
TRIG[:IMM] (none)
TRIG:SOUR < space > BUS
TRIG:SOUR? (none)
[SOUR]:VOLT[:LEV][:IMM][:AMPL] [suffix]
[SOUR]:VOLT? (None) or MlN or MAX
[SOUR]:VOLT[:LEV]:TRIG[:AMPL] [suffix]
[SOUR]:VOLT[:LEV]:TRIG? (None) or MlN or MAX
[SOURl:VOLT:PROT[:AMPLl? (None)
Common Commands
Command Parameters Command Parameters
*CLS (None) *RCL < space > < NRf >
*ESE *RST (None)
*ESE? (None) *SAV < space > < NRf >
*ESR? (None) *SRE < space > < NRf >
*IDN? (None) *SRE? (None)
*OPC (None) *STB? (None)
*OPC? (None) *TRG (None)
*PSC < space > < bool > *TST? (None)
*PSC? (None) *WAI (None)