Asus ME-99 - Manual (Page 35)

ASUS ME-99 User’s Manual 35
3. HARDWARE SETUP
Connectors
3. H/W SETUP
15) Internal Audio Connectors (4-pin AUX, MODEM, CD2, CD1)
These connectors allow you to receive stereo audio input from sound sources
such as CD-ROMs, TV tuners, or MPEG cards. The MODEM connector allows
the onboard audio to interface with a voice modem card with a similar connec-
tor. It also allows the sharing of microphone and speaker between the onboard
audio and the voice modem card.
ME-99 Internal Audio Connectors
MODEM
Modem-In
Ground
Modem-Out
Ground
CD1
Left A
udio Channel
Right A
udio Channel
Ground Ground
CD2
Right A
udio Channel
Left A
udio Channel
Ground Ground
AUX
Right A
udio Channel
Left A
udio Channel
Ground Ground
01
01
01
®
ME-99
16) IrDA-Compliant Infrared Module Connector (5-pin IR)
This connector supports the optional wireless transmitting and receiving infra-
red module. This module mounts to a small opening on system cases that sup-
port this feature. You must also configure the setting through UART2 Use In-
frared (see 4.4.2 I/O Device Configuration) to select whether UART2 is di-
rected for use with COM2 or IrDA. Use the five pins as shown in Back View and
connect a ribbon cable from the module to the motherboard according to the pin
definitions.
ME-99 Infrared Module Connector
Front View
+5V IRTX
IRRX
(NC) GND
Back View
+5V
IRRX
IRTX
(NC)
GND
IR
01
01
01
®
ME-99