Asus ME-99 - Manual (Page 20)

20 ASUS ME-99 User’s Manual
3. HARDWARE SETUP
5) VGA Frame Buffer Setting (DSW2-6)
You can select the display memory allocation mode with this switch. When UMA
is selected, the integrated graphics accelerator uses up to 8MB of system memory
as display memory. Non-UMA uses the optional dedicated onboard VGA memory
(up to 8MB SDRAM).
NOTE: When this is set to UMA, be sure that there is a DIMM inserted into
DIMM socket 1.
Setting DSW2-6
UMA [ON] (default)
Non-UMA [OFF]
01
01
01
®
ME-99
ME-99 VGA Frame Buffer Setting
DSW2
UMA Non-UMA
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Motherboard Settings
3. H/W SETUP
4) Onboard VGA Setting (DSW2-5)
The onboard AGP VGA may be enabled or disabled using this switch.
Setting DSW2-5
Enable [OFF] (default)
Disable [ON]
01
01
01
®
ME-99
ME-99 Onboard VGA Setting
DSW2
Disable
Enable
(Default)
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8