Acer Altos G710 - Manual (Page 193)

183
Note: By default, the time interval for setting the server’s DHCP
(Dynamic Host Configuration Protocol) option is 60 seconds. When
you change network settings of the NIC 1 host, the server will wait
for 20 to 60 seconds to get the IP address from the DHCP server.
You can then change the network settings of the NIC 2 host after
60 seconds have elapsed.
To configure the LAN settings:
(1) Press the Navigation key. A screen similar to the one below
appears.
(2) Use the Navigation key to select an option you want to
change.
Setting
The Setting menu allows you to customize the ePanel functions. The
menu also includes options for powering off or restarting the server.
• User Preference
This option is used to change the screen color of the ePanel
module’s display and select the display switch the display