Ask Proxima 9280 - Manual (Page 15)

15
power
volume
lens shift
mode
normal
zoom
focus
menu
auto image
select
lamp
replace
warning
temp.
ready
lamp
status
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to adjust zoom. (P21)
Used to open or close the
MENU operation. (P18, 19)
MENU BUTTON MODE BUTTON
READY INDICATOR
POWER ON–OFF BUTTON FOCUS BUTTONS
VOLUME BUTTONS
WARNING TEMP. INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P24, 32)
Used to operate AUTO
IMAGE function. (P29)
Used to adjust focus. (P21)
This indicator lights green
when the projector is ready
to be turned on. And it
flashes green in Power
Management mode. (P36) This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode. This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P40) This indicator flashes red
when internal projector
temperature is too high.
(P39)
Used to adjust volume.
(P23)
Used to reset to normal
picture adjustment preset
by factory. (P29, 35) Used to select an item or
adjust the value in the MENU.
It is also used to pan the image
in DIGITAL ZOOM mode.
(P31) Used to execute the item
selected.
It is also used to
expand the image in DIGITAL
ZOOM mode. (P31)
Used to turn the projector
on or off. (P20)
ZOOM BUTTONS
Used to adjust lens shift.
(P21)
AUTO IMAGE BUTTON SELECT BUTTON NORMAL BUTTON POINT BUTTONS
LENS SHIFT BUTTONS
INDICATORS
TOP CONTROL