Ask Proxima 9280 - Manual (Page 14)

14
CONNECTING THE PROJECTOR
R G B H V
R G B H V
PC IN-1
PC IN-2
analog digital PC control 1
PC control 2
audio 1
audio 2
(stereo)
(stereo)
AV IN
monitor OUT
reset R/C jack
S-video R– audio– L
Y/video– Cb/Pb– Cr/Pr
R– audio– L video
(mono)
CONNECTING TO THE COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable
Monitor Output
Desktop type Laptop type
Control Cable
for Serial Port
Audio Cable
(stereo)
Terminal
Serial port PS/2 port Audio Output
Audio Input
CONTROL PORT 1 or 2
AUDIO OUT
COMPUTER
AUDIO IN 1 or 2
COMPUTER IN 1
Use one of these Control
Cables corresponding
with the terminal of your
computer.
MAC Adapter
Set the slide
switches follow-
ing the chart
below.
ADB port
Cables used for connection ( ✽ = Cables are not supplied with this projector.)
• VGA CABLE (HDB 15 pin)
• CONTROL CABLE FOR PS/2 PORT, SERIAL PORT, or ADB PORT
• MAC ADAPTER
• DVI CABLE (24 pin)
✽
• BNC CABLE (BNC x 5) ✽
• AUDIO CABLE (RCA X 2 - Mini Plug (stereo))
• AUDIO CABLE (Mini Plug (stereo))
✽
Control Cable
for PS/2 Port
Control Cable
for ADB Port
Terminal Terminal Audio Cable
(stereo) ✽
NOTE :
When connecting the cable, the power cords of
both the projector and the external equipment
should be disconnected from AC outlet. Turn the
projector and peripheral equipment on before the
computer is switched on.
Terminals of the Projector
Audio Amplifier
Audio Speaker
(stereo)
External Audio Equipment External Monitor
MONITOR OUT
Monitor Input
COMPUTER IN 1 COMPUTER IN 2
BNC Cable ✽
Monitor Output
Use any of COMPUTER
INPUT jacks.
• When both ANALOG jack
and DIGITAL jack are
connected, the DIGITAL
jack has priority over the
ANALOG jack.
DVI Cable ✽
BNC Cable ✽
Use either VGA
Cable or DVI Cable
corresponding with
your computer.
Monitor Output